potíže s základní deskou

[El Diablo]

a není nějaký test, kterýj bych ten HDD otestoval a zjistil jestli je OK nebo na ....

Je. Většinou na stránkách výrobce a pro konkrétní řadu...

[Reklama]

[mike54]

tak něco to našlo!!
tady je screen http://img76.imageshack.us/img76/5963/snmek033et4.jpg
pls koukněte na ten log...

SeaTools Desktop v3.02.04
Copyright (c) 2005 Kroll Ontrack Inc.

10/3/2006 @ 7:15 PM

The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.


System Information:
BIOS Date 07/20/05
Conventional Memory size 638 K
Extended Memory size 58532 K
IO Channel type PCI



Drive Information:
SIZE MODEL
--------- ---------------------
80 GB ST380011A


Serial Number = 5JV0DRQW
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 9729x255x63

PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 2549 20975
EXTENDED
2 FAT32 2550 6119 29366
EXTENDED
3 NTFS 6120 9727 29678


Diagnostic Results:

Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.



Results from Seagate's DiagATA/SCSI:

-----------------------------------------------------------------

DIAGATA.EXE Version 3.08.50629ML
Copyright (c) 2002-2005 by Seagate Technology LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 03-Oct-2006 18:00:34
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JV0DRQW
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156301488 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Check: Passed
DST Poll Time = 60 seconds
DST - Passed
PIO/DMA Data Compare
Total Bytes = 8245248
Estimated PIO Transfer Rates
Min: 2.26MB/s Max: 2.31MB/s Avg: 2.29MB/s
Estimated DMA Transfer Rates
Min: 73.79MB/s Max: 92.23MB/s Avg: 89.54MB/s
SMART Check: Passed
Short Test Passed: 03-Oct-2006 18:01:45


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI

ATA Full Test Result: Passed



Results from Seagate's DiagATA/SCSI:

-----------------------------------------------------------------

DIAGATA.EXE Version 3.08.50629ML
Copyright (c) 2002-2005 by Seagate Technology LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 03-Oct-2006 18:33:11
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JV0DRQW
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156301488 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Check: Passed
Full Scan (0 to 156301488) - Passed
Elapsed Time: 41.71 Minutes
Estimated Internal Transfer Rates
Min: 17.93Mb/s Max: 4276.29Mb/s Avg: 267.87Mb/s
PIO/DMA Data Compare
Total Bytes = 20891136
Estimated PIO Transfer Rates
Min: 2.27MB/s Max: 2.32MB/s Avg: 2.30MB/s
Estimated DMA Transfer Rates
Min: 72.95MB/s Max: 121.58MB/s Avg: 91.87MB/s
Long Test Passed: 03-Oct-2006 19:15:04


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI



File Structure Test Result:

Partition 1 (NTFS (20.9 GB) Windows) Result: Failed with critical Errors

The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
- Other errors were found

NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.

Partition 2 (FAT 32 (29.3 GB) WINDOWS ) Result: Critical Error(s)
1 Critical Structure Error(s)
0 Non-Critical Structure Error(s)

Critical errors were found during the scan. These could be one or
more of the following:
- Invalid directory entry
- Invalid file or directory name
- Invalid file size
- Invalid file chain
- Cross-linked file chains
- Bad cluster value in file allocation table
- File allocation table mismatch
- BPB mismatch
- Invalid free space value

2969331 KBytes in 22449 files
1713 directories were found
3603387 KBytes in 5038 deleted files
179 deleted directories were found

ERROR SUMMARY:


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.

Partition 3 (NTFS (29.6 GB) ILKA) Result: Failed with critical Errors

The following errors were found while scanning the volume:
- One or more errors were found in metadata file records


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.



******************************************


Recommendation:
All selected physical diagnostics passed.

If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.

If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.




===============================================

[El Diablo]

Aha ty to tu máš dvakrát...
Viz: http://www.pc-help.cz/viewtopic.php?t=7932

[mikel]

Další pokračování tady:
http://www.pc-help.cz/viewtopic.php?t=7451

Toto téma zamykám!