Kostičkované čáry na monitoru, grafika?
Napsal: 03 dub 2012 18:26
Koupil jsem si PC na inzerát, ale po spuštění se na monitoru objeví kostičkované čáry a napíše chybu:
A problem has been detected and windows has been shut down to prevent damage to your computer. Attemp to reset the display driver and recover from timeout failed.
If this is the first time you have seen this stop error screen, restart your computer. if this screen appears agin, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new instalation, ask your software or hardware manufacturer for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable bios memory options such as caching or shadowing. If you need tio use safe mode to remove or disable componnents, restart your computer, press F8 to select advanced startup options, and then select safe mode.
Technical information:
*** STOP: 0000 jakysi radek cisel
*** atikmag.sys - adress
Collecting data for crash dump
Initializing disk for crash dump
Beginning dump of physical memory
Dumping physical memory to sdisk: 100
Physical memory dump complete
Musím pak vlézt do nouzového režimu. Problém je v tom, že přes celou obrazovku jsou kostičkované čáry. Prodejce pouze psal, že občas nenajede windows, jinak je prej vše OK. Vůbec nevím, co s tím:( Mohlo by tam být něco nekompatibilního? Nebo u něčeho starý drivery? V nouzovém režimu windows píše: Název události problému: BlueScreen
Poraďte dík
Sestava:
Windows 7 Ultimate
Direct 9.0c
Deska Gigabyte GA-P35-DS3
Intel core duo 2,66 MHz
Paměť 4GB (2x Kingston DDR2 2G)
Grafika Ati Radeon HD 2900 XT 512 MB
HDD 250GB Samsung 7200 ot
Zdroj Chieftec 620W
A problem has been detected and windows has been shut down to prevent damage to your computer. Attemp to reset the display driver and recover from timeout failed.
If this is the first time you have seen this stop error screen, restart your computer. if this screen appears agin, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new instalation, ask your software or hardware manufacturer for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable bios memory options such as caching or shadowing. If you need tio use safe mode to remove or disable componnents, restart your computer, press F8 to select advanced startup options, and then select safe mode.
Technical information:
*** STOP: 0000 jakysi radek cisel
*** atikmag.sys - adress
Collecting data for crash dump
Initializing disk for crash dump
Beginning dump of physical memory
Dumping physical memory to sdisk: 100
Physical memory dump complete
Musím pak vlézt do nouzového režimu. Problém je v tom, že přes celou obrazovku jsou kostičkované čáry. Prodejce pouze psal, že občas nenajede windows, jinak je prej vše OK. Vůbec nevím, co s tím:( Mohlo by tam být něco nekompatibilního? Nebo u něčeho starý drivery? V nouzovém režimu windows píše: Název události problému: BlueScreen
Poraďte dík
Sestava:
Windows 7 Ultimate
Direct 9.0c
Deska Gigabyte GA-P35-DS3
Intel core duo 2,66 MHz
Paměť 4GB (2x Kingston DDR2 2G)
Grafika Ati Radeon HD 2900 XT 512 MB
HDD 250GB Samsung 7200 ot
Zdroj Chieftec 620W