Dotaz na Ramku
Napsal: 02 bře 2019 10:08
Ahoj mám desku https://www.msi.com/Motherboard/P43C51/Specification a v ní Patriot 2x2gb 1333mhz cl9
Můžu mít Ramku 8gb 1600oc cl11,ale nevím jestli mi to deska pojme,tohle jsem zkopíroval s manualu a moje angličtina je špatna
Important
DDR3 memory modules are not interchangeable with DDR2 and the DDR3 standard
is not backwards compatible. You should always install DDR3 memory modules in
the DDR3 DIMM slots.
In Dual-Channel mode, make sure that you install memory modules of the same type
and density in different channel DIMM slots.
To enable successful system boot-up, always insert the memory modules into the
DIMM1 first.
Due to the chipset resource deployment, the system density will only be detected up
to 7+GB (not full 8GB) when each DIMM is installed with a 2GB memory module
Potřebuji radu,jestli ji vzít nebo ne
Můžu mít Ramku 8gb 1600oc cl11,ale nevím jestli mi to deska pojme,tohle jsem zkopíroval s manualu a moje angličtina je špatna
Important
DDR3 memory modules are not interchangeable with DDR2 and the DDR3 standard
is not backwards compatible. You should always install DDR3 memory modules in
the DDR3 DIMM slots.
In Dual-Channel mode, make sure that you install memory modules of the same type
and density in different channel DIMM slots.
To enable successful system boot-up, always insert the memory modules into the
DIMM1 first.
Due to the chipset resource deployment, the system density will only be detected up
to 7+GB (not full 8GB) when each DIMM is installed with a 2GB memory module
Potřebuji radu,jestli ji vzít nebo ne