CPU: AMD E-450 (1,65 GHz)
GPU: HD6320 (integrovana)
RAM: 4GB DDR3 1066 MHz
HDD: 500 GB (ST9500325AS)
OS: Win 7 profi x64 EN (legalni)
Mám ho už přes rok, ale někdy ke konci února mi vyskočila první BSOD, pak na nějaký čas fungoval správně a začátkem května mi vyhodil i 3 BSOD v jeden den a naposled na přelomu května a června. BSOD podle mě nehází při 1 konkrétní činnosti, poprvé se to stalo při projíždění internetu, pak při odpojování externího disku, kam jsem pro jistotu zálohoval data z interního ntb disku (což taky nebyla sranda). Přes školní rok se noťas vždy "zanese" programy, které jsou ve škole potřeba (visual a avr studio, matlab, pspice, labview apd.) takže tak jako tak mám vždy v plánu reinstal systému koncem léta. Ale protože teď vyhodil ty BSOD, tak to musím řešit o něco dříve.
Stáhl a hodil jsem na flash nejnovější "Hiren's Boot", kde jsem spustil "mini windows XP" a tam následně v příkazovém řádku "chkdsk X: /r", kde X: byly 2 oddíly disku C: 50 GB a D: 415 GB. Po tomto kroku jsem spustil ještě "chkdsk" přímo v systému (respektive po restartu). Také jsem "posbíral" všechny výpisy a vložil je do složky (C_Windows_Minidump) přiložil jsem take BSOD viewer a další věci. Provedl jsem také MemTest86+ z uvedeného Hiren's Boot, který provedl Standardní test, jenž trval něco okolo 2 hodin, bez nalezení chyby.
Všechny tyto informace jsem zabalil do archivu a nahrál na tuto adresu:
http://uloz.to/xyuAJi51/notebook-bsod-zip
Ještě jsem provedl na doporučení kontrolu v terminalu Parted Magic (H.Boot) - smartctl -a /dev/sda
Kód: Vybrat vše
Kód Tip: Mrkni na nejpopulárnější česká prsa -Stovkomat.cz :
root@PartedMagic:~# sudo smartctl -a /dev/sda1
smartctl 6.0 2012-10-10 r3643 [i686-linux-3.5.6-pmagic] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9500325AS
Serial Number: S2WAPDJA
LU WWN Device Id: 5 000c50 046fd9d39
Firmware Version: 0011LVM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Jun 11 08:49:11 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 135) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 085 034 Pre-fail Always - 188895589
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1228
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 41358888
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1919 (154 2 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1220
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1662
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 27
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 073 058 045 Old_age Always - 27 (Min/Max 27/27)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 55
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1
193 Load_Cycle_Count 0x0032 088 088 000 Old_age Always - 25072
194 Temperature_Celsius 0x0022 027 042 000 Old_age Always - 27 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 056 045 000 Old_age Always - 188895589
196 Reallocated_Event_Count 0x000f 098 098 030 Pre-fail Always - 1802 (12774 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 1669 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1669 occurred at disk power-on lifetime: 30 hours (1 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 d4 21 13 02 Error: UNC at LBA = 0x021321d4 = 34808276
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 d4 21 13 e2 00 01:36:53.330 READ DMA EXT
25 00 01 d3 21 13 e2 00 01:36:48.808 READ DMA EXT
25 00 01 d3 21 13 e2 00 01:14:50.893 READ DMA EXT
25 00 01 d2 21 13 e2 00 01:14:50.889 READ DMA EXT
25 00 01 d1 21 13 e2 00 01:14:50.889 READ DMA EXT
Error 1668 occurred at disk power-on lifetime: 30 hours (1 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 d3 21 13 02 Error: UNC at LBA = 0x021321d3 = 34808275
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 d3 21 13 e2 00 01:36:48.808 READ DMA EXT
25 00 01 d3 21 13 e2 00 01:14:50.893 READ DMA EXT
25 00 01 d2 21 13 e2 00 01:14:50.889 READ DMA EXT
25 00 01 d1 21 13 e2 00 01:14:50.889 READ DMA EXT
25 00 01 d0 21 13 e2 00 01:14:50.889 READ DMA EXT
Error 1667 occurred at disk power-on lifetime: 30 hours (1 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 d3 21 13 02 Error: UNC at LBA = 0x021321d3 = 34808275
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 d3 21 13 e2 00 01:14:50.893 READ DMA EXT
25 00 01 d2 21 13 e2 00 01:14:50.889 READ DMA EXT
25 00 01 d1 21 13 e2 00 01:14:50.889 READ DMA EXT
25 00 01 d0 21 13 e2 00 01:14:50.889 READ DMA EXT
25 00 01 cf 21 13 e2 00 01:14:50.888 READ DMA EXT
Error 1666 occurred at disk power-on lifetime: 30 hours (1 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 d3 21 13 02 Error: UNC at LBA = 0x021321d3 = 34808275
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 d3 21 13 e2 00 01:14:48.407 READ DMA EXT
25 00 01 d2 21 13 e2 00 01:14:48.404 READ DMA EXT
25 00 01 c1 21 13 e2 00 01:14:48.394 READ DMA EXT
25 00 01 c0 21 13 e2 00 01:14:48.383 READ DMA EXT
25 00 40 c0 21 13 e2 00 01:14:46.081 READ DMA EXT
Error 1665 occurred at disk power-on lifetime: 30 hours (1 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 d3 21 13 02 Error: UNC at LBA = 0x021321d3 = 34808275
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 c0 21 13 e2 00 01:14:46.081 READ DMA EXT
25 00 40 80 21 13 e2 00 01:14:46.080 READ DMA EXT
25 00 40 40 21 13 e2 00 01:14:46.079 READ DMA EXT
25 00 40 00 21 13 e2 00 01:14:46.079 READ DMA EXT
25 00 40 c0 20 13 e2 00 01:14:46.078 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 976 -
# 2 Extended offline Completed without error 00% 972 -
# 3 Short offline Completed without error 00% 962 -
# 4 Short offline Completed without error 00% 941 -
# 5 Short offline Completed without error 00% 941 -
# 6 Short offline Completed without error 00% 41 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Nyní notebook provádí kontrolu disku pomocí programu ViVard také z Hirens Boot.
Mám v plánu dále zformátovat celý ntb disk, rozdělit ho na 2 oddíly, tak jako předtím a na menší (systémový) nahrát znovu OS.
Pokud by to ale problém s BSOD neřešilo, mohu udělat i další testy, které budou potřeba.
diky Hans
