Prevencia disku

[IhateApel]

Môžem Vás poprosiť, o to, aby ste sa mi pozreli na tento výpis zo SMARTu? Disk je starý, tak by ma zaujímalo, v akom je stave. Je ešte použitelný?

Kód: Vybrat vše


SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   058   048   006    Pre-fail  Always       -       197814695
  3 Spin_Up_Time            0x0003   096   096   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   096   096   020    Old_age   Always       -       4488
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   086   060   030    Pre-fail  Always       -       449480298
  9 Power_On_Hours          0x0032   054   054   000    Old_age   Always       -       40859
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   020    Old_age   Always       -       4561
194 Temperature_Celsius     0x0022   040   047   000    Old_age   Always       -       40 (0 12 0 0 0)
195 Hardware_ECC_Recovered  0x001a   058   048   000    Old_age   Always       -       197814695
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       2
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       2
199 UDMA_CRC_Error_Count    0x003e   200   199   000    Old_age   Always       -       2
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0


Celý výpis: http://ptos.tk/codeboard/view/ALOqdlGKYo

[Reklama]

[MiliNess]

Prístup odmietnutý - Tento kód bol označený ako súkromný, nemôžeš ho zobraziť!

Překopíruj sem raději výpis z CDI. Je to bod 2e.
Můžeš přidat i protokol systém - 2b

[IhateApel]

Nemám Windows. Použil som GSmartControl z Linuxu.

Výpis:

Kód: Vybrat vše

smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.19.0-22-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus
Device Model:     ST3160023AS
Serial Number:    5MT00PCC
Firmware Version: 8.12
User Capacity:    160,000,000,000 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-6 T13/1410D revision 2
Local Time is:    Sat Jul 11 21:00:59 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)   Offline data collection activity
               was completed without error.
               Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (  430) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               No General Purpose Logging support.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     (  94) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   058   048   006    Pre-fail  Always       -       197814695
  3 Spin_Up_Time            0x0003   096   096   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   096   096   020    Old_age   Always       -       4488
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   086   060   030    Pre-fail  Always       -       449480298
  9 Power_On_Hours          0x0032   054   054   000    Old_age   Always       -       40859
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   020    Old_age   Always       -       4561
194 Temperature_Celsius     0x0022   040   047   000    Old_age   Always       -       40 (0 12 0 0 0)
195 Hardware_ECC_Recovered  0x001a   058   048   000    Old_age   Always       -       197814695
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       2
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       2
199 UDMA_CRC_Error_Count    0x003e   200   199   000    Old_age   Always       -       2
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 216 (device log contains only the most recent five errors)
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 216 occurred at disk power-on lifetime: 40853 hours (1702 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 40 00 5f a0 e0  Error: IDNF 64 sectors at LBA = 0x00a05f00 = 10510080

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 00 5f a0 e0 00      03:02:30.317  READ DMA EXT
  25 00 40 c0 5e a0 e0 00      03:02:30.316  READ DMA EXT
  25 00 40 80 5e a0 e0 00      03:02:30.315  READ DMA EXT
  25 00 40 40 5e a0 e0 00      03:02:30.314  READ DMA EXT
  25 00 40 00 5e a0 e0 00      03:02:30.313  READ DMA EXT

Error 215 occurred at disk power-on lifetime: 40850 hours (1702 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 40 00 5f a0 e0  Error: IDNF 64 sectors at LBA = 0x00a05f00 = 10510080

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 00 5f a0 e0 00      00:09:55.788  READ DMA EXT
  25 00 40 c0 5e a0 e0 00      00:09:55.787  READ DMA EXT
  25 00 40 80 5e a0 e0 00      00:09:55.786  READ DMA EXT
  25 00 40 40 5e a0 e0 00      00:09:55.785  READ DMA EXT
  25 00 40 00 5e a0 e0 00      00:09:55.784  READ DMA EXT

Error 214 occurred at disk power-on lifetime: 40846 hours (1701 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 40 00 5f a0 e0  Error: IDNF 64 sectors at LBA = 0x00a05f00 = 10510080

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 00 5f a0 e0 00      00:10:23.136  READ DMA EXT
  25 00 40 c0 5e a0 e0 00      00:10:23.135  READ DMA EXT
  25 00 40 80 5e a0 e0 00      00:10:23.134  READ DMA EXT
  25 00 40 40 5e a0 e0 00      00:10:23.133  READ DMA EXT
  25 00 40 00 5e a0 e0 00      00:10:23.132  READ DMA EXT

Error 213 occurred at disk power-on lifetime: 40842 hours (1701 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 40 00 5f a0 e0  Error: IDNF 64 sectors at LBA = 0x00a05f00 = 10510080

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 00 5f a0 e0 00      00:09:59.018  READ DMA EXT
  25 00 40 c0 5e a0 e0 00      00:09:59.017  READ DMA EXT
  25 00 40 80 5e a0 e0 00      00:09:59.016  READ DMA EXT
  25 00 40 40 5e a0 e0 00      00:09:59.015  READ DMA EXT
  25 00 40 00 5e a0 e0 00      00:09:59.014  READ DMA EXT

Error 212 occurred at disk power-on lifetime: 40836 hours (1701 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 40 00 5f a0 e0  Error: IDNF 64 sectors at LBA = 0x00a05f00 = 10510080

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 00 5f a0 e0 00      02:18:56.185  READ DMA EXT
  25 00 40 c0 5e a0 e0 00      02:18:56.184  READ DMA EXT
  25 00 40 80 5e a0 e0 00      02:18:56.199  READ DMA EXT
  25 00 40 40 5e a0 e0 00      02:18:56.198  READ DMA EXT
  25 00 40 00 5e a0 e0 00      02:18:56.197  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     40859         -
# 2  Short offline       Completed without error       00%     32490         -
# 3  Short captive       Completed without error       00%     32488         -
# 4  Short captive       Completed without error       00%     32487         -
# 5  Short offline       Completed without error       00%        22         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


[MiliNess]

Nějaký problém tam je.
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 2
199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 2

[petr22]

Jsou tam nejake ty vadne sektory.

Jak dlouho vydrzi tezko rict - jsou disky ktere s par vadnymi sektory funguji roky a je taky par disku kde 1 vadny sektor na nevhodnem miste a je konecna vcetne vsech dat.

[IhateApel]

Tak ten disk už má nejaké tie roky za sebou. Je ešte bezpečné ho používať?