jak zprovoznit USB ?
Napsal: 17 srp 2009 09:42
Známá vlastní starší počítač s Windows XP který chce používat taky pro práci s fotkama (tiskárna funguje přes paralelní port).
Zkoušel jsem oba USB (připojil foťák, pak USBflasku) => bez odezvy.
Zákl.deska (z výpisu HWiNFO): MicroStar 6199VA/6154VA
V manuálu http://motherboards.org/files/manuals/79/6199va.zip píšou pouze:
USB Connectors
The mainboard provides a UHCI(Universal Host Controller Interface)
Universal Serial Bus root for attaching USB devices like: keyboard, mouse
and other USB devices. You can plug the USB device directly to this
connector.
PIN SIGNAL
1 VCC
2 -Data0
3 GND
4 +Data0
AWARD® BIOS SETUP
OnChip USB
This should be enabled if your system has a USB installed on the
system board and you wish to use it. Even when so equipped, if you add a
higher performance controller, you will need to disable this feature.
The choice: Enabled, Disabled.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus
(USB) controller and you have a USB keyboard.
The choice: Enabled, Disabled.
Zkoušel jsem oba USB (připojil foťák, pak USBflasku) => bez odezvy.
Zákl.deska (z výpisu HWiNFO): MicroStar 6199VA/6154VA
V manuálu http://motherboards.org/files/manuals/79/6199va.zip píšou pouze:
USB Connectors
The mainboard provides a UHCI(Universal Host Controller Interface)
Universal Serial Bus root for attaching USB devices like: keyboard, mouse
and other USB devices. You can plug the USB device directly to this
connector.
PIN SIGNAL
1 VCC
2 -Data0
3 GND
4 +Data0
AWARD® BIOS SETUP
OnChip USB
This should be enabled if your system has a USB installed on the
system board and you wish to use it. Even when so equipped, if you add a
higher performance controller, you will need to disable this feature.
The choice: Enabled, Disabled.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus
(USB) controller and you have a USB keyboard.
The choice: Enabled, Disabled.