Hi, I just buy AsRock G41C-GS motherboard, because my old ASUS P5KC is not working properly (only one ddr3 slot works.., and its big board and i have free micro atx case) . It looks that this is only 775 socket motherboard available now. Every components what i have are working with my old mobo.
thre is a list of my components now:
MB AssRock G41C-GS
CPU Intel C2D E8200 45nm process (asrock says its supported http://www.asrock.com/mb/Intel/G41C-GS/?cat=CPU )
2x SAMSUNG 2GB 2Rx8 PC3-10600E M391B5673DZ1 (asrock says its supported http://www.asrock.com/mb/memory/G41C-GS.pdf )
Graphic card GeForce 9600GT
HDD is some WD 400GB, not connected yet.
Power Source is old 400W Eurocase, but working fine.
other memory modules i tried are some KINGSTON 512MB DDR2 800mhz (mb has slots for ddr2 and ddr3)
So i put everything on its place CPU, RAM, cables... and turn pc on, but there is no display activity.. Fans are spinning, led diodes are ok, power button is ok.
It has jumper for FSB setting to 1333, so i set it as manual says. Also i have tried other ddr3 and ddr2 memories, also only one memory module but still nothing.
There was no signal from graphic card so i tried the integrated graphics onboard with VGA cable (cable is ok too, tested), still nothing.
THX for any help :)
