Firmware upgrade asus wl500gp a crash! Vyřešeno

[qckx]

Jak mi tady poradili tak jsem na svůj router nahrál novej firmware, akorát že už teď vůbec nefunguje, ale jakože fakt že vůbec a já vlastně ani nevim jak to opravit. Prostě se ani nemůžu připojit na to webové rozhraní, prostě jako kdyby snad už nic nedělal.. Poraďte prosím

[Reklama]

[Žbeky]

Dělal jsi to přesně podle návodu? Připojený přes kabel a ne wi-fi?

Můžeš zkusit asusácký program firmware restoration tool.

If - for some reason - this does not work, or you want to upload a special or older firmware then you should try to upload the firmware using the firmware restoration tool. This needs the following steps:

- Disable all but one network interfaces on your PC. This is nessesary because the firmware restoration tool is not very intelligent in finding the correct interface to use for communicating with the router.
- Configure Windows TCP/IP networking to have static IP address 192.168.1.10 as shown in this image.
- Disconnect the power cable.
- Press the reset button on the back of the router.
- Keep pressing the reset button while inserting the power cable again.
- Keep pressing the reset button until the power LED starts flashing every second.
- Start the firmware restoration tool on your PC (You can find this tool on the CD or download it from the Asus website).
- This tool should find the Asus router -> select it.
- Select the correct firmware file you want to upload. Double check again if it's the correct one!
- Press upload.