heslo do biosu

[El Diablo]

Díval ses na ten link co sem sem postnul?

[Reklama]

[intenso]

jasne dival sem se tam...zaregistroval sem se a poslal technikovi dotaz...to asi neni live diskuze ze?

[intenso]

stahnul sem si cmospwd, ale nechce se mi to spustit ve win xp...jak to mam spustit?

[El Diablo]

Je to popsaný v TXT...

- Windows NT, 2000, XP, 2003
To work on cmos memory, ioperm need to be installed and running.
ioperm gives direct port I/O access for specified ports to user-mode process
(ring 3) using Ke386SetIoAccessMap and Ke386IoSetAccessProcess kernel functions.

1- You need administrator priviledges to install this driver
"ioperm.exe -i"
2- Start the service if needed with "net start ioperm"
3- Run "Cmospwd_win.exe"

WARNING: You should disable or uninstall ioperm
with "ioperm.exe -u" if you don't want to decrease
your security!


musíš nejdřív spustit "ioperm.exe -" (v příkazovém řádku)
potom spusť "Cmospwd_win.exe"

[intenso]

no spustil sem ioperm.exe z prikazoveho radku, hned na to sem spustil cmospwd_win.exe a nic. jen mi na moment problikne cerne okno a vubec se to nespusti.

[El Diablo]

musíš dát ioperm.exe -i

[intenso]

aha...ted se mi objevilo nejake dosacke okno, kde v tom najdu to heslo?

[intenso]

a nebo jak se s tim da resetovat bios? sem z toho jelen...

[El Diablo]

V okně se ti objeví seznam BIOSů a vedle potenciální heslo...

Heslo se sice dá vymazat ale pro laptopy se to nesmí použít...



---------------------------------------------------
---------------------------------------------------
¦ Typical Usage for DOS and all Windows users ¦
---------------------------------------------------
---------------------------------------------------

1) Identify your BIOS manufacturer (usually displayed at boot-up)

2) Start in DOS, or start a DOS session in Windows 95/98/ME.
For Windows NT or Windows 2000 boot from a DOS or Windows 95/98 boot
disk (you can find boot disks at http://www.AnswersThatWork.com), and run
CMOSPWD from your boot floppy (or another floppy).

3) C: [Enter]
cd \CMOSPWD [Enter]

4) Type CMOSPWD at the DOS prompt and press Enter.

5) CMOSPWD will display a list of possibilities. Use the possibilities
itemised against your BIOS manufacturer.
Remember :

a) For AWARD BIOSes, use the Numeric Keypad (with NumLock ON).
b) AWARD 4.50PG BIOS always accepts "AWARD_SW", or "d8on",
or "589589".
c) Old Phoenix BIOSes will accept "phoenix".

6) If the standard method does not work, then try to kill
the CMOS password with CMOSPWD /K (and press Enter),
and then see if you can get into the CMOS without a password.
If you can, you successfully "killed" the old CMOS password.
DO NOT KILL THE CMOS ON LAPTOPS!

[intenso]

no nasel sem v tom okne pro phoenix bios [ 2Ff][ ] ... zadal sem jako heslo 2Ff a nic...proc se vlastne to smazani hesla nesmi pro laptopy pouzit?

[El Diablo]

To nevím, to sem se tam nedočetl. Zřejmě to smaže i něco co nemá...

[intenso]

nejsou jeste nejake dalsi napady jak bych mohl zlomit to heslo do biosu?