DVD mechanika ukazuje zeje cd mechanika Vyřešeno

[blodhblaka]

Dobry den mam DVD mechaniku ale TYP je prej cd-rom pritom cte dvd ale nevypaluje a taky kdyz dam prazdne dvd-r tak taky rika ze ma 0 bytes volnyho/celkovyho mista nevíte co stím prosim?

[Reklama]

[guest]

Co je to zač? Není to ROMDVD?

[blodhblaka]

je to jednotka DVD-RW

[guest]

V čem vypaluješ? A jak je stará?

[blodhblaka]

vypaluju v nero 7
stara je tak 5 let ale před tydnem jeste vypalovala ted je to myslim tim systemem protoze to ukazuje ze je to cd-rom viz obrazek

[guest]

Obrázek není. Zkus v tom Neru kliknout dole na Více a informace o disku, pokud to tam máš.

[Žbeky]

Můžeš mi říct, proč jsi dnes založil už 3 témata na tvou mechaniku a zamkl sis je?

[blodhblaka]

obrazek http://postimage.org/image/ipo1eti8t/

rika ze je prazdny DVD-R volna 4,489 gb

--- Doplnění předchozího příspěvku (28 Čer 2012 17:59) ---

myslem jsem ze uz to mam ale nemam sorry

[guest]

Zkus tu mechaniku ve Správci zařízení odinstalovat a restartuj počítač, možná se umoudří. Ale 5 let stará mchanika je babička.

Pak ti to říká správně. A obrázky vkládej sem, jako přílohu!

[blodhblaka]

neumoudřila se ale tu mam log z nera


Blodhblaka
Blodhblaka Indastries
1C81-A09M-18K1-M2EX-4008-686C-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-2500A >Version: 1.06 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <USB 2.0> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BEVS-22RST0 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A D: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2038MB (2087280kB)
Free physical memory: 1108MB (1135084kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.6.2012
Burn DVD Image
18:01:27 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

18:01:28 #2 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

18:01:28 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2174481 (483:13.06, 4247MB)

18:01:28 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

18:01:28 #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
Disc Manufacturer: INFOME - DIAR30
Disc Application Code: 64, Disc Physical Code: 193

18:01:28 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:01:28 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 2174482 (2174482) = #2174482/483:13.7
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2174482 blocks [D: _NEC DVD_RW ND-2500A]
--------------------------------------------------------------

18:01:28 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [D: _NEC DVD_RW ND-2500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4453339136, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2174482 | 2174482 | 0x00
2174482 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

18:01:28 #9 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

18:01:28 #10 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

18:01:28 #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

18:01:28 #12 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

18:01:28 #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

18:01:28 #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5 540 KB/s)

18:01:28 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:01:28 #16 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode

18:01:28 #17 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes

18:01:28 #18 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:01:28 #19 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 21 2E 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

18:01:28 #20 CDR -1046 File ThreadedTransferInterface.cpp, Line 1752
Illegal disc
D: _NEC DVD_RW ND-2500A

18:01:28 #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once

18:01:28 #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

18:01:28 #23 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5 540 KB/s)

18:01:28 #24 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

18:01:31 #25 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

18:01:31 #26 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[guest]

Z toho vůbec moudrej nejsem. Píše to tam něco o nelegálním disku, ale netuším co to znamená.

[blodhblaka]

ja taky ne