Zkusím, ale musím sehnat, je dlouhý.
Ale vypadává i ten terminál a ten má svůj. To mi došlo včera, protože se mi na PC vše projevovalo v pořádku a terminál se snažil připojit při platbě, ale nikdy jsem to tomu nepřipisoval. Na druhý pokus vždy OK, takže tipuji stejný problém.
Výpadky netu na pracovním PC
- Karrex
- Elite Level 10
- Příspěvky: 9618
- Registrován: listopad 08
- Bydliště: Brno
- Pohlaví:
- Stav:
Offline
Re: Výpadky netu na pracovním PC
Sestava v profilu.
Watercooling Club EXOverclocker@HWBot league rank#1 Aprilia Shiver Club BMW ///M Club
Watercooling Club EXOverclocker@HWBot league rank#1 Aprilia Shiver Club BMW ///M Club
-
- Pohlaví:
Re: Výpadky netu na pracovním PC
Jinak bridge mod by to mělo umět: https://www.youtube.com/watch?v=xRcQPQRHpyQ
- Karrex
- Elite Level 10
- Příspěvky: 9618
- Registrován: listopad 08
- Bydliště: Brno
- Pohlaví:
- Stav:
Offline
Re: Výpadky netu na pracovním PC
Haha, jo, díky. Tam jsem si toho vůbec nevšiml.
Pokud by to bylo tím boxem, vyřeší mi to další router?
Pokud by to bylo tím boxem, vyřeší mi to další router?
Sestava v profilu.
Watercooling Club EXOverclocker@HWBot league rank#1 Aprilia Shiver Club BMW ///M Club
Watercooling Club EXOverclocker@HWBot league rank#1 Aprilia Shiver Club BMW ///M Club
Re: Výpadky netu na pracovním PC
Your device supports the bridge mode and you can use this service from
your service provider to access the Internet.
1. Ensure that your device can connect to the Internet by using your
nano-SIM card automatically.
2. Log in to the 5G CPE configuration web page.
3. Change the operation mode to Bridge Mode. The device will be
restarted automatically.
NOTE:
Please disconnect from the Internet first and then you can change the
mode.
4. The first client connected to your device will obtain the IP address
from the WAN DHCP host and connect to the Internet directly.
NOTE:
The other clients cannot access the Internet. You can use those clients
to log in to the 5G CPE configuration web page.
your service provider to access the Internet.
1. Ensure that your device can connect to the Internet by using your
nano-SIM card automatically.
2. Log in to the 5G CPE configuration web page.
3. Change the operation mode to Bridge Mode. The device will be
restarted automatically.
NOTE:
Please disconnect from the Internet first and then you can change the
mode.
4. The first client connected to your device will obtain the IP address
from the WAN DHCP host and connect to the Internet directly.
NOTE:
The other clients cannot access the Internet. You can use those clients
to log in to the 5G CPE configuration web page.
Windows 11 PRO 64bit, Základní deska: Asus Strix B550-F Gaming, CPU: AMD Ryzen 5 5600, Grafická karta: ASUS TUF GAMING GeForce RTX 3060 Ti O8G GDDR6X, Ram: Kingston FURY 32GB KIT DDR4 3200MHz CL16, Disk: Kingston KC3000 NVMe 1TB, Chladič: Endorfy Fera 5, Zdroj: MSI MPG A650GF
-
- Mohlo by vás zajímat
- Odpovědi
- Zobrazení
- Poslední příspěvek
-
- 7
- 4411
-
od vasekpetr1
Zobrazit poslední příspěvek
03 úno 2025 10:39
-
- 4
- 2952
-
od RIKI22
Zobrazit poslední příspěvek
27 led 2025 16:39
Kdo je online
Uživatelé prohlížející si toto fórum: Žádní registrovaní uživatelé a 1 host